Call Now : +989139181512
Our Locate: Mahmood Abad Industrial Town, Isfehan, Iran
Call Now : +989139181512
Our Locate: Mahmood Abad Industrial Town, Isfehan, Iran
You have chosen Hersin marble as a natural stone for your desired building. Before proceeding with the purchase, there are several points to consider. In Atasang, we have outlined important factors to consider when buying Hersin marble. So, if you intend to purchase flooring, interior cladding, or internal staircase stones suitable for your building’s decor […]
You have chosen Hersin marble as a natural stone for your desired building. Before proceeding with the purchase, there are several points to consider. In Atasang, we have outlined important factors to consider when buying Hersin marble. So, if you intend to purchase flooring, interior cladding, or internal staircase stones suitable for your building’s decor and design, be sure to read this article.
Hersin marble is a type of sedimentary metamorphic stone that has been extracted and processed in a mine located in Hersin County for several years. With a cream background and a slightly gray color, it has managed to attract a lot of attention from builders and architects. Its use in flooring and interior cladding is very common.
1. The stone should be free of any cracks and decay.
2. Hersin marble should have suitable and uniform thickness.
3. The stone should have uniform sorting.
4. Dimensions should be nearly square and level.
5. Sub-stones should be of excellent quality.
6. The surface of the stone should be free of epoxy.
7. High-quality filling materials should be used.
1. Flooring for residential, office, commercial, and educational units.
2. Interior cladding of buildings.
3. Internal staircase stones.
1. Flooring, especially in places subject to heavy equipment.
2. Flooring in heavily polluted areas.
3. Exterior cladding exposed to sunlight, extreme cold, and heat.
Hersin marble is a sedimentary metamorphic stone with a cream to grayish background scattered with crystalline veins known as “deer horn.” It has very good sub-stone acceptance and is resistant to pressure and abrasion, making it an excellent choice for interior flooring of residential, office, and commercial buildings, as well as interior wall cladding such as lobby walls, staircase stones, parking lots, and walkways. Hersin marble is processed into tiles, slabs, and stair treads.
Iran is a center for limestone production and has a wide variety of colors. Hersin marble has similarities with other stones such as Kerm Khooy marble, Bistam marble, Paradise marble, Ark Birjand, Takab marble, etc., which have a similar background color and analytical similarity to Hersin marble.
Important points during installation of Hersin marble:
The most important factor after selecting the appropriate stone for flooring is proper and standard sub-flooring. Improper sub-flooring over time can cause uneven surfaces and stone fractures.
During installation, immediately wash the surface with drinking water before it dries.
Be sure to scope out mesh stones (glued behind stones) or remove the mesh behind stones.
Avoid using saline or wastewater to prepare the mortar.
Install stones when there is no frost.
Proper mixing of sand and cement.
No plaster behind stones to prevent separation of stones from mortar.
If using 123 adhesive, you can clean the soaked surface with a damp cloth or solvent.
It is better to consider a suitable place before buying and sending the stone, so that during construction, stones have minimal displacement and damage.
If storing stones for a long time, it is better to consider a covered place free of any construction materials such as cement, plaster, etc., or cover the stones with nylon or a tarp.
Avoid stacking stones on top of each other and it is better to place stones on one edge with a maximum slope of 20 degrees against the wall.
To prevent damage to the ground-up surfaces, always place the ground-up sides of the stones on top of each other.
Use a crane or forklift for unloading and store them in a suitable place using pallets or suitable crates.
When using a crane, it is recommended not to lift pallets with wires and it is better to use slings or belts for unloading pallets.
Considering that stones are loaded and delivered properly, if stones break during transportation or unloading, no responsibility will be taken by the seller and you should proceed through the insurance company.
The best way to clean Hersin marble is to first remove dust from the stone with a soft brush.
Mix a cleaning agent with ceramic stone in a bucket of cold water to make the solution thick and then clean the stones with this solution.
Dry the remaining cleaning cloth or towel on the stone. Until no cleaner remains on the stone and finally dry the stone gently with a towel.
To clean the stone, the important and important point is to always use cold water. Because hot water and high temperatures can destroy the enzymes in the cleaners. This method can be easily used to clean other internal stones of the building.
If any damage occurs to the stone, be sure to consult with the experts of the Atasang collection before any action.
The price of Hersin stone depends on various factors, the most important of which is:
1. Stone grading
2. Precise and uniform sorting
3. Precise and uniform stone dimensions
4. Quality of stone processing”
